Chrometech at Castle Hill, the people doing the re-chroming of some parts for a "41 60 coupe.Our customer previously used Chrometech, for electroplating the very badly pitted headlight trim strips and wiper towers on his '39 and they still look great some 5 years later.Not a mark, blemish or pit on the pieces.
Suffice to say Chrometech can re-chrome just about anything. There are somethings we don't chrome-plate , pieces that are in too poor condition even for Walter's magic skills.
Our process is very labour intensive. Depending on condition we have to soak the dashes or other parts in solvent to remove the grease.It may need a highfill. After highfill we need to sand back again. Then dashes need to be taped up in the rear and electrodes are inserted. Now it goes into the spray room and a conductive paint is applied. Tape will need to be removed, electrodes are connected for subsequent electroplating.After an 8 hour electroplating process in the copper, the dash gets rinsed and then nickel plated for an hour. Now it gets rinsed and then chrome-plated. We only leave parts in the chrome tank for 5 minutes, rinse and dry. The wires are cut off and the job is ready.
7 comments:
we have more information better than you about O Rings and Oil seals and rubber products more details visit http://www.globalautomotive-industry.com/products-services/rubber-components/bentex-industries-welded-rubber-products-plastic-parts-automobiles-tractors/
This is extra-ordinary blog.Bentex Industries, providing components for the automotive industry since two decades, are a leading manufacturer and exporter of Injection Precision moulded Plastic component and compression Moulded components of Rubber.Rubber Products for Automobiles and Tractors
Thank you for putting forward this important discussion
Fone Perfomance Sports Car Parts in UAE Engine Parts,Fuel System,Clutch,Electronics,Exhaust System,Cooling System,Auto Accessories
Toyota trd pro grille I think this is an informative post and it is very useful and knowledgeable. therefore, I would like to thank you for the efforts you have made in writing this article.
copper brass radiator Very efficiently written information. It will be beneficial to anybody who utilizes it, including me. Keep up the good work. For sure i will check out more posts. This site seems to get a good amount of visitors.
I think this is an informative post and it is very useful and knowledgeable. therefore, I would like to thank you for the efforts you have made in writing this article. toyota tacoma grill
Post a Comment